Operation Manual
Table Of Contents
- Table of contents
- Before starting
- Setting Up
- Installation Requirements
- Checking the Accessories
- Unpacking and Installing the Machine
- Installing the Optional Equipment
- Connecting the Power Code
- Connecting a LAN Cable/USB Cable
- Loading Paper in the Tray
- Setting Up This Machine
- Connecting to a Wireless LAN (Only When the Wireless LAN Module is Mounted)
- Installing a Driver and Software to a Computer
- Basic Operations
- Maintenance
- Troubleshooting
- Operating Management/Specifications
- Contact Us
- 96 -
6. Troubleshooting
3
Cover the removed image drums with paper so that the image drums are not
exposed to light.
4
Pull out the jammed paper gently to the rear of the machine (the direction of
the arrow) if an edge of jammed paper can be seen.
5
If paper jams in the fuser unit, press the jam release lever (b) on the fuser unit
and slowly pull the jammed paper toward you.
6
Tilt back the lock levers on the both sides of the fuser unit toward you.
7
Hold the fuser unit handle and lift the fuser unit out of the machine.