Operation Manual

Installing upgrades > 149

ARD

DISK

DRIVE

The optional 40GB internal hard disk drive (HDD) enables

collating of printed pages and can be used to store overlays and

macros, fonts, and secure or proof documents waiting to be

printed.

1. Switch the MFP off and disconnect the AC power cable.

2. Pull open the access panel on the side of the machine.

3. Locate the clip (1) on the top of the disk unit into the slot

(2) in the printer.

4. Plug the end of the connecting cable (3) into the disk unit

connector (4) in the printer.

5. Tighten the two thumbscrews (5).