Operation Manual

Installing upgrades > 150

6. Close the access panel, pressing firmly at the top to latch

it closed.

7. Reconnect the AC power cable and switch the MFP on.

8. When the MFP is ready, print a menu map as follows:

(a) Press Menu (1) on the scanner control panel.

(b) Using the UP/DOWN arrow keys (2), navigate to

the Report Print menu and press OK (3) once for the

menu map.

(d) When the menu map is printed, press Return (4) to

exit the menu system.

9. Examine the first page of the menu map.

Near the top of the page, between the two horizontal lines,

you will see the current MFP configuration. This should now

indicate that the hard disk unit is installed.