Operation Manual

Installing upgrades > 151

All that remains is to configure the Windows printer driver so that

it knows the hard disk unit has been fitted, and the additional

features can be made available immediately. See “Adjusting

windows printer drivers” on page 152.

DDITIONAL

PAPER

TRAY

1. Switch the MFP off and disconnect the AC power cable.

2. Place additional paper tray on desired location.

3. Observing safety rules for lifting and, using locating

guides, place MFP on top of the additional paper tray.

4. Locate securing clip, press down and lock into position.

5. Re-connect the AC power cable and switch the MFP ON.

TORAGE

CABINET

Refer to manufacturers instructions.

NOTE

If you need to transport this product, make sure you unlock

the securing clip and remove the additional paper tray

beforehand.