Operation Manual

Troubleshooting > 158
and pull it forwards into the internal drum cavity and
withdraw the sheet.
(b) To remove a sheet from the central area of the
belt (2), carefully separate the sheet from the belt
surface and withdraw the sheet.
(c) To remove a sheet just entering the fuser (3),
separate the trailing edge of the sheet from the belt,
push the fuser pressure release lever (4) towards
the front and down to release the fuser’s grip on the
sheet, and withdraw the sheet through the drum
CAUTION!
Do not use any sharp or abrasive objects to separate
sheets from the belt. This may damage the belt
surface.
2
4
3
1