Operation Manual

Configuring your machine.... > 73
Adding a telephone handset
If you want to add a telephone handset to your MFP, connect the
line to the Tel socket (in certain countries it may be necessary to
use a telephone plug adaptor).
You will also need to update the telephone settings to set the ring
response:
1. Press the Menu button on the control panel.
2. Using the UP arrow key, navigate to Fax Settings and
press OK.
3. Using the UP arrow key, navigate to Setup Fax then press
OK.
4. Using the UP/DOWN arrows keys, navigate to Ring
Response and press OK.
5. Select the required response setting and press OK.
6. Press Return to store the new configuration setting and
exit the menu.
NOTE
Loop the telephone line round the ferrite once as shown.
NOTE
Manual receive must also be activated. See “Manual receive”
on page 72.