Operation Manual

Print settings and security > 85

6. Select the Auto Erase Time-out period.

Specify a period of time (hours:minutes) during which the

print job is stored in the MFP’s HDD. When this period

expires, the print job is automatically erased from the

HDD.

7. Click [OK] to accept your changes.

8. Click [OK] to close the Printer Properties window.

9. Print your document.

RINTING

THE

DOCUMENT

Follow the same procedures as described in the section “Printing

the document” on page 79 for printing a secure document. In this

case you will enter your password, and the document will be

erased from the hard disk depending on the options you specified

when sending the document to print.