Operation Manual

ManualsBrandsOki ManualsPrinterC610

Menu functions > 43

USB Setup

This menu controls the operation of the printer’s USB data interface.

When you have changed any settings in the USB menu, turn the printer OFF, then ON

again.

Security Setup

ITEM SETTINGS EXPLANATION

USB Enable / Disable ENABLES / DISABLES the USB port.

Speed 480 / 12 Mbps Selects the interface speed. After setting change the

menu, the printer restarts on exit.

Soft Reset Enable / Disable Enables or disables the SOFT RESET command.

Offline Receive Enable / Disable OFFLINE RECEIVE.

Serial Number Enable / Disable Specifies whether to ENABLE or DISABLE a USB serial

number.

The USB serial number is used to identify the USB device

connected to your PC.

NOTE

This menu only displays if the optional SD card is installed.

ITEM SETTINGS EXPLANATION

Job Limitation Off

Encrypted Job

Job limitation mode control.

Jobs other than specified ones are rejected.

Make Secure SD

Card

Execute SD Card encoding function is made effective.

Formation of the cipher key and encoding function (security mode)

information is turned on. At the same time, it initializes the SD card.

After execution, the following confirmation messages will appear.

Are You Sure?

Yes

If No is selected, the display will return to the previous menu.

If Yes is selected, the printer will be automatically rebooted and the

encoding function will become effective.

Display Conditions:

SD Card is installed, SD Card encoding function invalidity and

Storage Setup > Enable Initialization > Yes

Make Normal SD

Card

Execute SD Card encoding function is set to invalid.

Deletion of the cipher key and encoding function (security mode)

information is turned off. At the same time, it initializes the SD card.