Operation Manual

Menu functions > 46
Power setup
Language setup
System setup
ITEM SETTINGS EXPLANATION
Peak Power Control Normal
Low
Sets Peak Power Control level.
Power Save Enable
Disable
Sets Enable/Disable of Power Save Mode.
If Power Save is disabled, pressing the Power Save /
Wake Up button on the control panel will manually
override this setting.
Sleep Enable
Disable
Sets Enable/Disable of Sleep Mode.
USB Host Power Off
On
Set power supply for USB-HOST of the whole power save
mode.
When Off, suppress power supply.
When On, do normal power supply.
ITEM SETTINGS EXPLANATION
Language Initialize Execute Initialises the message file loaded in FLASH.
When you press the Enter button, the following
message, requesting confirmation, will appear,
Are You Sure?
Yes
No
If NO is selected, you will be returned to the source
menu.
The procedure for clearing the disk will start immediately
after the menu and rebooting.
ITEM SETTINGS EXPLANATION
High Humid Mode Off
On
If moistened paper is curled significantly after printing,
change the setting to ON.
Note: Moistened paper means paper that has been left in
a high-humidity environment.