Operation Manual

Menu functions > 47
P RINT STATISTICS MENU
This menu should only be changed by the System Administrators. In order to gain access
to this menu:
1. Turn OFF the printer. Turn ON the printer while pressing the Back button.
When Print Statistics Menu displays, take your finger off the button.
2. Press the Enter button.
3. At the Enter Password prompt, enter the Admin password:
(a) Using the up and down MENU buttons, scroll to the required letter/digit.
(b) Press the Enter button to input and move to the next letter/digit.
(c) Repeat steps (a) and (b) until all letters/digits are entered.
Enter your 4 digit password.
(The default password is 0000).
4. Press the Enter button.
5. Press the up or down MENU button until the “item” you want to change is displayed.
6. Press the Enter button.
7. Using the up or down MENU button, identify the parameter as required.
8. Press the Enter button. An asterisk (*) will appear next to the setting, indicating
that this setting is currently in effect.
9. Press the On Line button to switch to online. The machine will automatically re-
boot.
This menu is in ENGLISH only (default settings in bold type).
ITEM SETTINGS EXPLANATION
Enter Password **** Enters a password to enter Print Statistics menu.
The default value is “0000”.
The password for entry to Print Statistics is different
from the password for entry to Functions-Admin Setup.
“Print Statistics” category is not shown when Print
Statistics function is not supported.
Usage Report Enable/Disable Enables/Disables the printing of the Usage Report.
When changing a setting value, the printer is rebooted.
Group Counter Enable/Disable Specifies if the Group counter is displayed in the Usage
Report Print.
Enable: Displayed,
Disable: Not displayed.
Conditions for display:
Enable must be selected in Print Statistics > Usage
Report.
Supplies Report Enable/Disable Indication of frequency of consumable exchange/non
indication is set.
When Enable is set, also the maintenance counter is
indicated in together.
Conditions for display:
Enable must be selected in Print Statistics > Usage
Report.