User`s guide

ES3640e MFP User’s Guide
Copying > 63
NOTE
If you specify Auto for Tray Selection, the MFP automatically
selects the tray (from Trays 1 to 4) that can supply the most
appropriate paper. To print on paper from the MPTray, specify
MPTray for Tray Selection. If your copy is produced on paper
you did not expect to be used, specify the appropriate tray
manually and retry. In Copy Mode, there are limitations on the
combination of Media Type, Media Weight and Paper Size. For
information on paper size combinations, refer to “Appendix D
– Media support information” on page 188.
5 Lighter/Darker Auto, -5 to +5 by 1 Allows you to adjust the
brightness levels for
scanning and printing.
This is not applied
(disabled) if Auto
Exposure is set to ON.
6 Color Mode Color, B&W Allows you to select the
color mode of the
output. If Color is
selected, scanned
image is printed in full
color (Image
Type=24bit color).
If B&W is selected,
scanned image is
printed in 8-bit
grayscale. No color
settings are applied.
7Simplex/
Duplex
1to1 Sided, 1to2 Sided,
2to1 Sided, 2to2 Sided,
Allows you to specify
the original document
image layout and the
desired printed
document image layout.
If you specify 2to1Sided
or 2to2 Sided, set your
original documents on
the ADF.
Simplex/
Duplex
(Duplex
Layout)
Top/Top, Top/Bottom Allows you to define the
orientation of the front
and back sides of a
duplex page (for
scanning and printing).
No Feature Options Description