Operation Manual

- 54 -
How to Print from the MP Tray
2
2. Printing Basic Operation
●● How to Print from the MP Tray
This procedure explains how to load paper in the MP tray.
Note
● Do not load paper of different sizes, types or weights at the same time.
● When adding paper, remove the paper on the MP tray and straighten the edges of both stacks of paper, and then load them
again.
● Do not put anything other than paper for printing in the MP tray.
1 Open the MP tray (1) forward by
inserting your ngers into the front
recesses (2).
2
2
1
2 Pull out the paper support (3) by holding
the center part of it.
3
3 Unfold the sub support (4).
4
4 Open the paper set cover (5).
5
5 Adjust the manual feeding paper guide
(6) to the width of paper to be loaded.
6
6 Insert the paper with the print side face
up.
Note
● Do not load paper exceeding the [ ] mark (7) of the
paper guide.
7