Operation Manual

- 93 -
Network Setting Items
5
5. Network Settings
Shaded text indicates the factory default setting.
Item
Setting Description
TELNET
Web
browser
Conguration
Tool
(Network
Setting Plug-in)
Network
Card Setup
(Windows)
Network
Card
Setup
(Mac)
NetBEUI NetBEUI - - - ENABLE Set whether to use the
NetBEUI protocol.
DISABLE
NetBIOS
over TCP
NetBIOS over
TCP
- - - ENABLE Set whether to use
the NetBIOS over TCP
protocol.
DISABLE
NetWare NetWare - - - ENABLE Set whether to use the
NetWare protocol.
DISABLE
EtherTalk EtherTalk - - - ENABLE Set whether to use the
EtherTalk protocol.
DISABLE
Password Network
Password
Password
Change
Password
Change
Change
Password
(last six digits of
MAC address)
Change the network
administrator’s
password, using up
to 15 alphanumeric
characters. The password
is case sensitive. If you
forget the password you
specied, the password
cannot be changed.
 IP Filtering
Shaded text indicates the factory default setting.
Item
Setting Description
TELNET
Web
browser
Conguration
Tool
(Network
Setting Plug-in)
Network
Card Setup
(Windows)
Network
Card
Setup
(Mac)
IP Filtering IP Filtering - - - ENABLE Set whether to use IP
ltering, the function
to restrict access by IP
address. This function
requires thorough
knowledge of IP
addresses. Normally,
select [DISABLE].
Set the items below
properly when selecting
[ENABLE]; otherwise,
no access using TCP/IP is
allowed.
DISABLE
Start
Address #1-
10
Start Address
1-10
- - - 0.0.0.0 Specify the IP addresses
that are allowed to
access the printer. You
can specify an individual
address or an address
range. Specify the start
address and end address
when setting the address
range. Entering “0.0.0.0”
disables the setting.
End Address
#1-10
End Address
1-10
- - - 0.0.0.0