Operation Manual

- 99 -
Network Setting Items
5
5. Network Settings
Shaded text indicates the factory default setting.
Item
Setting Description
TELNET
Web
browser
Conguration
Tool
(Network
Setting Plug-in)
Network
Card Setup
(Windows)
Network
Card
Setup
(Mac)
Authenticate
Server
Authenticate
Server
- - - ENABLE Set whether to
authenticate a certicate
sent from the RADIUS
server by using a CA
certicate.
DISABLE
EAP retry - - - - 1 Set the number of
retries of IEEE802.1X
authentication. Up to
9 times can be set.
Normally, use the factory
default setting.
-
3
-
9
EAP
timeout
- - - - 10 Set the timeout to wait
for the response from the
server during IEEE802.1X
authentication. Set the
value within the range
of 10 to 60 seconds.
Normally, use the factory
default setting.
-
60
 IPSec
Shaded text indicates the factory default setting.
Item
Setting Description
TELNET
Web
browser
Conguration
Tool
(Network
Setting Plug-in)
Network
Card Setup
(Windows)
Network
Card
Setup
(Mac)
IPSec IPSec - - - ENABLE Set whether to use IPSec.
DISABLE
- IP Address
1-50
- - - 0.0.0.0 Specify the host address
allowed to communicate
by IPSec.
● Use one-byte
characters separated
by a dot for an IPv4
address.
● Use one-byte
alphanumeric
characters separated
by a colon for an IPv6
global address.
● IPv6 link-local address
is not supported.
- IKE
Encryption
Algorithm
- - - 3DES-CBC Set the IKE encryption
method.
DES-CBC
- IKE Hash
Algorithm
- - - SHA-1 Set the IKE hash method.
MD5
- Dife-Hellman
Group
- - - Group1 Set the Dife-Hellman
group used in Phase1
Proposal.
Group2