Operation Manual

- 94 -
Network Setting Items
5
5. Network Settings
Shaded text indicates the factory default setting.
Item
Setting Description
TELNET
Web
browser
Conguration
Tool
(Network
Setting Plug-in)
Network
Card Setup
(Windows)
Network
Card
Setup
(Mac)
IP Address
Range #1-
10 Printing
Printing 1-10 - - - ENABLE Set whether to allow
to changes to the
conguration from the IP
addresses specied in IP
Address Range #1-10.
DISABLE
IP Address
Range #1-10
Conguration
Conguration
1-10
- - - ENABLE Set whether to allow to
change conguration from
the IP addresses specied
in IP Address Range #1-
10.
DISABLE
Admin IP
Address
Administrator’s
IP Address to
Register
- - - 0.0.0.0 Set the IP address of
the administrator. Only
this address can always
access the printer.
Remember that when the
administrator accesses
the printer via a proxy
server, this item is set
to the address of the
proxy server and all
access via the proxy
server is allowed. It is
recommended that the
administrator accesses
the printer without using
a proxy server.
 MAC Address Filtering
Shaded text indicates the factory default setting.
Item
Setting Description
TELNET
Web
browser
Conguration
Tool
(Network
Setting Plug-in)
Network
Card Setup
(Windows)
Network
Card
Setup
(Mac)
MAC
Address
Filtering
MAC Address
Filtering
- - - ENABLE Set whether to use
MAC address ltering,
the function to allow
access only from MAC
addresses specied.
This function requires
thorough knowledge of
MAC addresses. Normally,
select [DISABLE].
Set the items below
properly when selecting
[ENABLE]; otherwise,
no access is allowed from
the network.
DISABLE
MAC
Address
Access
MAC Address
Access
- - - ACCEPT Set whether to allow or
deny access from the
MAC addresses specied
in MAC Address #1-50.
DENY