Operation Manual

- 37 -
Adjusting Color on the Computer
2
2. Adjusting Color
Eliminating White Gap
Between Text and Background
(Overprinting black)
Depending on the conditions of use, you can
set black to overprint and reduce the white gap
between black letters and colored background.
Note
● This function cannot be used with some applications.
● This function can be used when printing only text over a
background color.
● If the toner layer is thick, the toner may not be xed
rmly.
For Windows
1 Open the le you want to print.
2 Select [Print] from the [File] menu.
3 Click on [Preferences] or [Properties].
4 On the [Job Options] tab, Select
[Advanced].
5 Set [Overprint Black] to [On] and then
click [OK].
Simulating Printing Results
for Ink
You can simulate output such as that of an offset
printing press by adjusting the CMYK color data.
Note
● Windows XPS printer driver cannot be used for this
function.
● This function can be used when the [Ofce Color] or
[Graphic Pro] is selected for [Color Mode].
For Windows
1 Open the le you want to print.
2 Select [Print] from the [File] menu.
3 Click on [Preferences] or [Properties].
4 Click [Detail] on the [Color Setting]
and select [Graphic Pro].
5 Select [Printer Simulation].
6 Select an ink feature you want to
simulate from [Simulation Target
Prole] on [Input Prole] and click
[OK].