Operation Manual

- 39 -
Adjusting Color with Color Correct Utility
2
2. Adjusting Color
Changing Gamma Value or
Hue
You can adjust tone by adjusting the gamma
value and output color by adjusting the hue.
For Windows
1 Click [Start] and select [All
Programs]> [Okidata]>[Color
Correct Utility]> [Color Correct
Utility].
2 Select [Hue & Saturation Tuning.] and
then click [Next].
3 Select the printer and click [Next].
4 Select the standard mode and click
[Next].
5 Apply settings as necessary by adjusting
the slide bar.
If you select the [Use printer’s unadjusted
color] check box, 100 percent of each color is
used for printing, and the slide bar of hue is xed.
6 Click on [Print Test].
7 Check the print result.
If you are not satised with the result, repeat
steps 5 to 6.
8 Click on [Next].
9 Enter a name and then click [Save].
A dialog box appears.
10 Click on [OK].
11 Click on [Finish].
Printing in Adjusted Color
Settings
For Windows
1 Open the le you want to print.
2 Select [Print] from the [File] menu.
3 Click on [Preferences] or [Properties].
4 Click [Detail] on the [Color Setting]
and select [Ofce Pro].
5 Select the [Color Correct Utility
Settings] and select the setting you
created with the Color Correct Utility and
then click [OK].