Operation Manual

- 54 -
Changing the Equipment Settings
3
3. Changing Printer Settings
Item Factory Default Description
Admin Setup Flash Memory
Setup
Initialize (NULL) Initializes the resident ash memory.
SD Card
Setup
Initialize (NULL)
Resize
Partition
PCL nn% 20% Sets the partition size.
Common
mm%
50%
Common
ll%
30%
<Apply> (NULL)
Format Partition PCL
System Setup Near Life Status Enable Sets whether to display the warning that
informs the drum, fuser, or belt is near
the end of life on the LCD display.
Near Life LED Enable Sets the LED lamp control of the warning
that informs the toner, drum, fuser, or
belt is near the end of life.
Idle Display Toner Gauge Selects the information shown on the
display during idling.
Panel Contrast 0 Adjust the contrast of the LCD of
operation panel.
Buzzer Setup Invalid Operation
Volume
Off Sets the volume of the buzzer for the
invalid operations.
Error Volume Off Sets the volume of the buzzer for errors.
Power Setup Power Save Enable Sets whether to enable the power save
mode.
Sleep Enable Sets whether to enable the sleep mode.
Auto Power Off Auto Cong Sets the auto power off function.
Change
Password
New Password (NULL) Sets a new password to enter the
[Admin Setup] menu and [Boot Menu].
Verify Password (NULL) Enter the new password set in
[New Password] to verify.
Enter the password consisting of 6 to
12 digits with alphanumeric characters
(lower case).
Settings Reset Settings (NULL) Resets EEPROM of CU to initialize the
user menu settings.
Save Settings (NULL) Saves the current menu settings.
Restore Settings (NULL) Restores the stored menu settings.