Operation Manual

- 67 -
Windows Utilities
4
4. Using Utility Software
14 Check whether the menu language
format value printed in step 12 is in the
value range displayed on the screen.
15 Click on [Next].
16 Check the content to be set and, click on
[Setup].
17 Click [Finish].
18 Check that the language you want is
displayed is on the screen of the printer.
19 Restart the printer.
Note
● If the language selection screen is not selected, carry
out the following procedure.
a Click on [Start] and select [Search].
b Enter “D:/Utilities/PanelDwn/
oppnlngs.exe” and press the
<Enter> key.
(This example uses the DVD-ROM
drive (D:))
c Go to step 8.