Operation Manual

Menu functions - C830 > 57
P RINT S TATISTICS M ENU
This menu is only accessible to System Administrators. In order to gain access to this
menu, follow the instructions in “How to change the settings - Administrator” on page 35,
but hold down the Menu button instead of the Enter button.
This menu is in ENGLISH only (default settings in bold type).
ITEM SETTINGS EXPLANATION
Enter Password XXXX Enters a password to enter Print Statistics menu.
The default value is "0000".
The password for entry to Print Statistics is different
from the password for entry to Functions-Admin Setup.
"Print Statistics" category is not shown when Print
Statistics function is not supported.
Usage Report Enable/Disable Enables/Disables the printing of the Usage Report.
When changing a setting value, the printer is rebooted.
Group Counter Enable/Disable Specifies if the Group counter is displayed in the Usage
Report Print.
Enable: Displayed,
Disable: Not displayed.
Conditions for display:
Enable must be selected in Functions/Print Statistics/
Usage Report.
Supplies Report Enable/Disable Enebles/disables the Supplies Report.
Enable must be selected in Functions/Print Statistics/
Usage Report.
Reset Main Counter Execute Resets the main counter to zero.
When executing this menu, resets the main counter to
zero and exits from the menu.
Enable must be selected in Functions/Print Statistics/
Usage Report.
Reset Supplies
Counter
Execute Resets the Supplies counter to zero.
Change
Password
New
Password
Verify
Password
Changes the password.
Enable must be selected in Functions/Print Statistics/
Usage Report
xxxx Sets a new password to enter Print Statistics menu.
xxxx Re-enter new password set to enter Print Statistics set in
New Password for confirmation.