Operation Manual

- 30 -
Preparing Your Printer
1
1. Setup
4 Install the Wireless LAN module.
5 Close the Wireless LAN module cover.
6 Plug the AC cord.
7 Turn on your printer while pressing the
<ENTER> button.
8 Press the <ENTER> button.
9 Enter the administrator password, and
press the <ENTER> button.
The factory default password is “999999”.
10 Press the scroll button to select
[Wireless Module] and press the
<ENTER> button.
11 Press the scroll button to select
[Enable] and press the <ENTER>
button.
12 Press the <ON LINE> button.
Test Printing from the Printer
Check that you can print with the printer. Check
the detailed settings and status of your printer
by printing the contents of the settings (Menu
Map).
Note
● When a printer is in the power saving mode, press the
<POWER SAVE> button to restore from the mode.
1 Press the <Fn> key on the operator
panel.
2 Enter “100” using the ten-key pad and
press the <ENTER> button.
3 Press the <ENTER> button as
[Execute] is selected.
Configuration 1/1
Execute
4 After nishing a print of printer settings,
a setup for printing from a printer
completes.
Reference
● You can also print reports and lists for each function.
Refer to the User’s Manual (Advanced).