All-in-One Printer User Manual

Replacing consumable items > 145

3. Lift each of the image drum units out of the printer and

place them in a safe place away from direct sources of

heat and light.

4. Locate the two fasteners (5) at each side of the belt and

the lifting bar (6) at the front end.

5. Turn the two fasteners 90° to the left. This will release the

belt from the printer chassis.

6. Pull the lifting bar (6) upwards so that belt tilts up towards

the front, and withdraw the belt unit from the printer.

CAUTION!

The green image drum surface at the base of each

cartridge is very delicate and light sensitive. Do not

touch it and do not expose it to normal room light for

more than 5 minutes. If the drum unit needs to be out

of the printer for longer than this, please wrap the

cartridge inside a black plastic bag to keep it away

from light. Never expose the drum to direct sunlight

or very bright room lighting.