Operation Manual

Printer and paper overview > 14
Envelopes
Transparencies
Recommended type is:
CG3720 by 3M (A4 or Letter size)
Labels
Recommended type is:
Avery White Laser Label types 7162, 7664, 7666 (A4), or 5161 (Letter)
NOTE
Always print a sample to check the output results are satisfactory.
Printing on glossy paper may have unexpected results:
> Compared with plain paper, glossy paper may often be printed with a thin
toner film over it, or the images may be printed lighter.
> In a high temperature and high humidity environment, a thin toner film is
likely to occur. Glossy paper is best used in an environment below 25°C
temperature and 60% humidity.
> Image offsetting may occur particularly if you are printing high density
images or printing several copies.
> Due to its coating, glossy paper may “slip” when being fed into the
printer.
CAUTION!
Envelopes should be free from twist, curl or other deformations.
They should also be of the rectangular flap type, with glue that
remains intact when subjected to hot roll pressure fusing used in
this type of printer. Window envelopes are not suitable.
CAUTION!
Transparencies should be of the type designed for use in copiers
and laser printers. In particular, avoid office transparencies
designed for use by hand with marker pens. These will melt in the
fuser and cause damage.
CAUTION!
Labels should also be of the type recommended for use in copiers
and laser printers, in which the base carrier page is entirely
covered by labels. Other types of label stock may damage the
printer due to the labels peeling off during the printing process.