Extra Information

- 185 -
Windows utilities
4
5
1
2
3
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software

Registering proles
You can register and edit printer proles. Some
of the functions are explained below.
To register an ICC prole, it is necessary to
mount the (optional) HDD to the device.
Note
z
If using the prole registration and edit functions, install
the Storage Manager plug-in.
Reference
z
For how to install plug-ins, see “Installing” (P.180).
1
Select [Storage Manager] from the
[Plug-ins] menu.
2
Click [ ] to create a new project.
3
Click [ ], and change [File type] in the
[Open le] dialog box to "ICC prole
(*.ICC, *.ICM)".
4
Select the prole to be registered, and
click [Open].
5
Click [Component] in the ICC prole
added to the project to display the [Edit
le] dialog box.
6
Select the number of the prole to be
registered.
The numbers already used in the project
cannot be selected, and are displayed
against a yellow background.
7
If necessary, enter a comment in the
[Comments] eld.
8
Click the [OK] button to apply the changes.
9
Select the printer from the device list at
the bottom of the window.
10
Click [ ] to send the project associated to
the ICC prole that has been added to the
printer.
11
Check that the message "Command
Issued." is displayed, and click [OK].

Registering forms (form overlay)
You can register the logos, etc., as forms to the
device, and overlay for printing. This section
explains how to register forms.
Reference
z
For how to print overlays, see “Printing using registered
forms (overlay printing)” (P.101).
Memo
z
If using Windows PS printer drivers, administrator
privileges are required.

Creating forms
1
Click [Start], and then select [Devices
and printers].
2
Right-click the [OKI (product name)
(**)] icon (** describes the printer
driver type: PS, PCL6), and select
[Printer properties].
3
Select the [Port] tab, and enable the
[FILE:] check box in [Printer port], and
click [OK].
4
Create the form to be registered to the
printer.
5
Select [Print] from the [File] menu of
the application.
If using Windows PCL printer drivers, go to
Step 9.
6
Click [Advanced] (or [Preferences]).
7
Select the [Job Options] tab, and click
[Overlay].
8
Select [Create form].
9
Printing will be implemented.
10
Enter the name of the le to be saved.
11
Restore [Printer port] in the [Port] tab
which was modied in Step 3.