Extra Information

1
2
3
5
4
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
- 316 -
Table of setting items in the device setup screen
[Calibration]
z
Shaded areas are factory-set values.
Item Details
Auto Density Mode On
Off
Sets whether to automatically compensate density
and shade.
Auto BG Adjust Mode
*1
*1: Displayed if [Auto Density Mode] in the
control panel is set to [ON].
Off
-1
0
+1
+2
Compensates for print results variation due to
differences in the temperature and humidity
environments, print density, and print frequency.
Changes the value if there is burr in the image or
the underlay is dark.
Density Adjustment Media
Standard Media
Special Media
Sets the density adjustment to suit the media used.
Standard Media:
For the media of standard thickness to be
printed at high speed.
Special Media:
For the thick or special media to be printed at
low speed.
Adjust Density Execute Implements density compensation. Implement
when the device is in standby mode.
Adjust Registration Execute
Implements auto color misalignment compensation operations.
Implement when the device is in standby mode.
Heavy Media Adjust Off
-5
to
0
to
+15
Compensates the xing speed during card stock
printing.
Heavy Media Mode
Auto
On
Off
Sets the card stock mode. Suppresses misalignment of
the image training edge during card stock printing.
Enabled for ultra card stock 4 and ultra card stock 5.
Color Density Cyan Density
-3
to
0
to
+6
Adjusts the cyan density.
This setting is enabled from printing after the
density compensation has been implemented.
Magenta Density
-3
to
0
to
+6
Adjusts the magenta density.
This setting is enabled from printing after the
density compensation has been implemented.
Yellow Density
-3
to
0
to
+6
Adjusts the yellow density.
This setting is enabled from printing after the
density compensation has been implemented.
Black Density
-3
to
0
to
+6
Adjusts the black density.
This setting is enabled from printing after the
density compensation has been implemented.
White Density
*2
*2: Displayed when using
white toner in C941/C942/
ES9541/ES9542/Pro9541/
Pro9542.
-3
to
0
to
+6
Adjusts the white density.
This setting is enabled from printing after the
density compensation has been implemented.
Clear Density
*3
*3: Displayed when using clear
toner in C941/ES9541/
Pro9541.
-3
to
0
to
+6
Adjusts the clear density.
This setting is enabled from printing after the
density compensation has been implemented.