Operation Manual

Print options – PostScript > 70
The Image Shift dialog box displays.
2. Specify the unit of measurement.
3. Type the Front and Back image shift settings in the X and Y axis fields. You can also
use the arrow buttons to shift the image settings.
4. To align front and back images proportionately, select Align front and back
images.
S CALE
The operator can specify a scaling override, but the override is applied to any scaling value
already set in the active job. For example, if a user sends a job with a scaling value of 50%
and the operator specifies a Scale override of 300%, the job is printed at 150% of the
original document size, that is, 50% of 300%.
S CALE TO FIT
This option allows you to scale a job to a paper size different from the image size. When
you set this option to On, the image is increased or reduced in size to fit a paper size you
select from the Page Size option.
When this option is set to Off, the original document size is printed without any scaling,
even if you print to a larger paper size.
NOTE
The maximum value for both X and Y axes is 999.99 points/13.89 inches/
352.77 mm.
Original size
Letter
Print size
11 x 17
Scale to Fit set to On
Scale to Fit set to Off