Operation Manual

Copying – copy mode > 76
2 Original Size Auto, 5.5x8.5,
5.5x8.5R, 8.5x11,
8.5x11R, 8.5x13,
8.5x14, 11x17, A5,
A5R, A4, A4R, A3,
B5, B5R, B4,
Custom, Mixed
Allows you to select the paper size to
match the document size.
Mixed allows you to mix originals of size
letter and Legal.
3Tray
Selection
Auto, Tray 1, Tray 2,
Tray 3, Tray 4, Tray
5, MPTray
Allows you to define the paper tray for
printing.
Auto - Allows for automatic tray selection
based on the document image size and/or
scaling setting defined.
4Reduce/
Enlarge
Auto, Preset,
25% – 400% by 1%,
Select
Allows you to scale the copy.
5Lighter/
Darker
Auto, -5 to +5 by 1 Allows you to adjust the brightness levels
for scanning and printing. This is not
applied (disabled) if Auto Exposure is set to
ON.
6 Color Mode Color, B&W Allows you to select the colour mode of the
output. If Color is selected, scanned image
is printed in full colour (Image Type=24bit
colour).
If B&W is selected, scanned image is
printed in 8-bit grayscale. No colour
settings are applied.
7Simplex/
Duplex
1to1 Sided, 1to2
Sided, 2to1 Sided,
2to2 Sided
Allows you to specify the original document
image layout and the desired printed
document image layout.
If you specify 2to1 Sided or 2to2 Sided, set
your original documents on the ADF.
Simplex/
Duplex
(Duplex
Layout)
Top/Top, Top/
Bottom
Allows you to define the orientation of the
front and back sides of a duplex page (for
scanning and printing).
NOTE
1. If you specify Auto for Original Size, the MFP automatically selects the
paper size to match the original document. However, depending on the
document conditions (for example, if the background density is high),
document sizes may not be detected automatically. In this case, specify
the document size manually.
2. If you specify Auto for Tray Selection, the MFP automatically selects the
tray (from Trays 1 to 5) that can supply the most appropriate paper. To
print on paper from the MPTray, specify MPTray for Tray Selection. If your
copy is produced on paper you did not expect to be used, specify the
appropriate tray manually and retry.
3. In Copy Mode, there are limitations on the combination of Media Type,
Media Weight and Paper Size. For information on paper size combinations,
refer to “Appendix D – Media support information” on page 146.
NO. FEATURE OPTIONS DESCRIPTION