Operation Manual

Scanning – general > 88
S CANNING – GENERAL
Your MFP can carry out the following scanning functions via the SCAN button:
> FTP Server: An original document is scanned and the data is sent to an FTP server.
> SMB (Server Message Block): An original document is scanned and the data is sent
to a client PC.
> Mailbox: An original document is scanned and the data is saved in a mailbox.
> Hold Queue: An original document is scanned and the data is saved in the hold
queue.
> Remote Tool: Under remote control, an original document is scanned and the data
is sent to a host PC.
> SendMe (Interactive Scan): An original document is scanned then the scanned
image is edited if required before being sent by email as an attachment. Refer to the
SendMe User’s Guide for details.
S CAN TO FTP SERVER
The main steps in summary are:
(a) Press the SCAN button.
(b) Touch the FTP Server tab (set by default).
(c) On the FTP Server tab, enter the FTP Server name.
(d) On the Attachments tab, define your attachment properties, using the
Advanced Settings features as required.
(e) Set your document on the scanner unit.
(f) Press the START button on the scanner unit control panel.
These steps are expanded below.
NOTE
Additional features involving, for example the Fiery Remote Scan Tool or Web
Scan Tool for accessing files in the mailbox are described in the Fiery
documentation.
The TIFF file format supported is compliant with the TIFF v6 specification with
additional qualifiers for supporting JPEG compressed images within the TIFF
file. Single and multiple page files are supported. The following TIFF viewers
are recommended: ACD Systems ACDSee, Adobe Photoshop.
NOTE
At any time, you can press the Active Jobs, Job Log buttons to check the
status of your work.