Operation Manual

English
Optional Devices A-1
Appendix A
Optional Devices
USB Interface Kit
The OKI USB Interface Kit enables you to use your OKI DP-5000 Series
printer with an Apple® iMac™ or with a Windows 95/98® computer that
has a USB port.
Important Notes:
1 DO NOT unplug the USB interface cable while printing. If you
do so you must restart your computer before re-commencing
printing.
2 The OKI USB interface cable works only with the designated OKI
DP-5000 printer.
3 If your iMac computer is running Mac OS 8.1 you must install the
iMac update 1.0 software. This upgrade is not included on the
OKI CD-ROM but can be downloaded, free of charge, from the
Apple Web site. Please note that you do not need to install this
update with Mac OS 8.5 or greater.
System Requirements
• Apple iMac computer, Mac OS 8.1 with iMac Update 1.0 or later.
• PC compatible computer with USB port, Windows 98.
Installation for iMac
To install the OKI USB Interface Kit to enable you to operate your DP-
5000 printer with an Apple iMac, follow these steps:
Caution:
Make sure the computer and printer are turned off before you
connect the USB printer cable.
1 Connect the USB interface cable (1) to the parallel connector (2) on
the printer.