Operation Manual

English
Optional Devices A-5
10 Windows will now inform you that it has detected new hardware
(OKI DP-5000 printer) and the
Add New Hardware Wizard will
appear. Click
Next.
11 In the next window that appears, click Next to continue.
12 Select
CD-ROM drive and Specify a location from the Add New
Hardware Wizard
, and then click Browse... button to select the
CDROM Drive where the OKI installation CD is located. This will
launch an installation program for the printer driver.
Follow the instructions onscreen to complete the installation
13 If Windows prompts you to restart your computer, click
Yes.
Troubleshooting for USB Interface Kit
for iMac
Q1 The USB printer cannot be selected in the Chooser
Please check the following:
1 Make sure that the USB interface cable is properly connected to the
printer and iMac computer, and the printer is turned on. Then restart
your iMac.
2 Make sure that you have installed the iMac Update 1.0, if your iMac
was running Mac OS 8.1.
for Windows 98
Q1 The Add New Hardware Wizard (USB Printer) does not appear
when the USB interface cable is connected.
Please check the following:
1 Make sure that the USB interface cable is properly connected to your
printer and to your PC, and the printer is turned on.
2 Make sure that the ‘
Unknown Devices’ is not listed in the Device
Manager section of System Properties. To check this, follow these
steps:
• Right-click
My Computer and select Properties.
•In the
System Properties window that appears, select the Device
Manager
tab.
•Click
View devices by type to display all installed devices.
•If
‘Other devices’ exists, you need to delete it.