Operation Manual

English
Optional Devices A-11
Connecting SCSI Interface for
Macintosh
When your printer has been positioned in a suitable location, you can
connect it to your Macintosh computer with a SCSI interface and to a
suitable AC power source with the power cable.
Connecting the Macintosh SCSI interface module
When using your printer with a Macintosh computer, the printer must be
connected to the computer via a SCSI interface module.
To install the SCSI interface module on your printer, follow these steps:
1 Before connecting the SCSI interface module turn off the computer
and printer, and disconnect the printer power cord.
Note:
The SCSI interface module cannot be connected or disconnected
until the printer power cord has been removed.
2 Remove the rectangular plastic connector cover (1) located to the
right of the printer port on the back of the printer. To remove the
cover locate the black tab on the bottom of the cover, pull it up, and
twist it until it breaks free.
1