Operation Manual

English

A-12 Appendix A

3 Angle the SCSI interface module (1) so that the tab on top of the

module slips under the top edge of the computer printer cable slot.

The top edge of the module should rest against the frame of the

printer.

4 Gently press the bottom of the module until it clicks into place.

Removing the SCSI interface module

1 Turn off the power to your printer, computer, and all SCSI devices

connected. Remove the power cable from the wall socket and the

printer.

2 To disconnect the SCSI interface module (1) gently pull the plastic

handle (2) at the bottom of the module to release the catch and lift the

module away from the printer.