Operation Manual

English
1-12 Chapter 1
4 Release lever
This lever, located to the right of the carriage and platen, is used to clear
paper jams. Press the release lever down to remove the jammed paper.
When you close the front cover, the lever will automatically go back to
its original position.
5 Print head
The print head prints the characters. Take care not touch the underside
of the head.
Caution:
Mishandling the print head or carriage can cause damage to the
printer. Also, never load an ink cartridge directly into the carriage.
Malfunction or damage to the printer may result.
Paper Feed Switch
For continuous printing using automatic feeding, set the paper feed switch
to position “A”. To manually feed paper, set the paper feed switch to
position “M”.
Paper feed switch set to position “A” Paper feed switch set to position “M”
Caution:
Do not move the paper feed switch while paper is being fed,
otherwise the paper may feed in incorrectly. Move the paper feed
switch until it clicks into position “M” or “A”. Paper will not feed
properly unless the switch is correctly set to either “M” or “A”.