Operation Manual

English
4-4 Chapter 4
2 Immediately following installation, background printing is
turned off. Click on the
On button to enable background printing.
Background printing will not be available if you did not install
the Queue Kit software.
4
Click on the
Close box to close the Chooser.
When the selected printer driver is changed from a previous printer
driver, a dialogue box will appear to inform you that a different printer
has been selected. Click on the
OK button to close the dialogue box.
Testing the Printer
To make sure the printer is functioning correctly, use the Print Desktop
command in the
Finder.
Before using Print Desktop check the following:
• The printer is connected to the computer and is turned on.
• The system folder window is open (if not, double-click the folder on the
startup disk).
• There is paper in the printer.
Page Setup dialogue box
1
Select
Page Setup from the File menu. The Page Setup dialogue box
opens.
2
Make sure the paper type and size settings match the paper loaded in
the printer, (factory settings are Laser Paper, A4). If the paper type
does not match, select the appropriate settings.
3
Close the
Page Setup box by clicking OK.
Print Dialogue Box
1
Select
Print Desktop from the File menu. The Print dialog box opens.
2
Select required settings and click
Print to begin printing.
Print Preview
You can preview your printed job by clicking the
Preview button in the
Print dialogue box, the desktop will appear on screen. To print the desktop,
click
Print Page. Printing begins.