Operation Manual

English
Installation and Operation for Macintosh 4-9
2
In the Print dialogue box select either
Automatic, Photographs, or
Graphics & Text from the Type menu.
Notes:
1 When you select
Photographs from the Type menu, Darker
Black
is automatically selected in the Colour Matching section
of the Image Settings dialogue.
2 If the Type menu is set to
Greyscale or Black & White the
coloured image will be printed in monochrome or in greyscale.
3
Click the
Image button in the Print dialogue box.
4
Make colour matching selections as required. For selection
information see ‘Setting up Colour Matching option’.
5
After the settings have been completed, click
OK.
6
When you have completed your settings, click
Print in the Print
dialogue box.
The printer prints cyan, magenta, yellow, and black in that order as the
print head moves back and forth over the paper.
Notes:
1 If the four ink cartridges (cyan, magenta, yellow, and black) are
not installed, the error light will flash, and the printer will not
print.
2 See Chapter 2, ‘Initial Setup’, for information on installing ink
cartridges.
Setting up Colour Matching option
The printer has the following colour-matching options:
1 OKI DP-5000 Driver mode
This mode provides unique OKI colour matching. It is the default
mode for colour printing.
2 ColorSync™ mode
When ColorSync™ is selected, the printer performs colour
management using ColorSync™, which is part of the Macintosh
system software.