Operation Manual

English
5-4 Chapter 5
2
Click the
Document/Quality tab to bring to the front.
3
Select
Automatic, Photographs, or Graphics/Text from the
Document Type depending on the document to be printed.
4
Select
Plain Paper or Laser Paper for high grade paper from the
Media Type setting.
5
Set
Print Mode to VPhoto Colour.
Notes
1
When
Laser Paper
and
VPhoto Colour
are selected from the
Media Type
and
Print Mode
, respectively,
Glossy Finish
is
automatically set.
We recommend that
Glossy Finish is
normally set. If you do not want this setting, click the
More
Settings
button, then uncheck the Glossy Finish check box.
2When
Plain Paper
and
VPhoto Colour
are selected from the
Media Type
and
Print Mode
,
respectively,
VPhoto Primer (Un-
dercoat)
and
Glossy Finish
are automatically set.
VPhoto
Primer (Undercoat)
is set when
Automatic, Photographs
,
or
Graphics/Text
is selected from
Document Type
.
6
Make any other necessary changes to the settings
.
7
When you complete the setup, click
OK to close the dialog box.
8
Click
OK in the Print dialog box to start printing.