Operation Manual

English
Specialised Printing Operations 5-7
Load the Paper in Your Printer
The method used for loading paper depends on the paper type. Use manual
feed mode for cardboard (thick paper) and greeting cards. For plain paper
or laser paper, you may also use automatic feed mode.
Set Up the Printer Driver for Printing
1
Select
Print from the File menu to open the Print dialog box, then
click
Properties.
2
Click the
Document/Quality tab to bring to the front.
3
Set
Document Type to an option appropriate to the document to be
printed.
4
Set
Media Type depending on the paper to be used.
5
In
Print Settings click the Use Spot Colours check box so that the
Spot Colours dialog box is displayed.
6
In the
Spot Colour Settings click the Use Foil Colour(s) radio
button.
7
Set
Print Using to Single Ink.
8
Enabled ink cartridges among those installed in the printer are
displayed in
Select Ink Cartridge(s). Click the radio button(s) of the
ink cartridge(s) to be used.
Note:
If bidirectional communication is not possible, all the usable ink
cartridges are displayed.
9
When you complete the setup, click
OK to close the dialog box.
10
Click
OK in the Print dialog box to start printing.