Operation Manual

English
Specialised Printing Operations 5-9
•
Colour compositions using RGB settings (n/100%)
Note:
For instructions on changing colour component settings within an
application, refer to your software application User manual.
Depending on the application, a foil colour may not print correctly
even though the colour settings were properly set in the application.
Check the Preview window before printing, and try increasing or
decreasing the setting to get the correct foil colour to print.
Install the Ink Cartridges
Install the gold and silver foil colour ink cartridges plus the undercoat ink
cartridges listed in Requirements. The ink cartridges can be installed in
any order.
Load the Paper in Your Printer
Use manual feed mode for cardboard (thick paper). For plain paper or laser
paper, you can use automatic feed mode.
Set up the Printer Driver for Printing
1
Select
Print from the File menu to open the Print dialog box, then
click
Properties.
2
Click the
Document/Quality tab to bring to the front.
3
Set
Document Type to an option appropriate to the document to be
printed.
4
Set
Media Type depending on the paper used.
5
In
Print Settings click Use Spot Colours check box so that the Spot
Colours
dialog box is displayed.
6
In the
Spot Colour Settings click the Use Foil Colour(s) radio
button.
7
Set
Print Using to Multiple Inks.
8
Enabled ink cartridges among those installed in the printer are
displayed in
Select Ink Cartridge(s). Click the radio button(s) of the
ink cartridge(s) to be used.
Foil Colour R G B
Gold Foil 88 63 0
Silver Foil 74 76 77