Operation Manual

English
Specialised Printing Operations 5-11
Note:
Only a maximum of seven ink cartridges can be installed in the
printer at any one time. Cyan, Magenta, Yellow and Black
cartridges must always be installed. The Foil, Finish II and VPhoto
Primer cartridges are optional.
Prepare the Image to Be Printed
Create the data you want to print, then set the image areas to be printed in
foil colours to colours that correspond to the foil colours you want to use.
For the colours (and colour components) that correspond to each foil
colour, refer to the tables on page 5-12.
Note:
There are a small range of colour component values that will be
interpreted by the printer as indicating foil colours. Because of this,
photographs and other data with many different colours may have
areas that match the foil colour designations and print only partially
in foil colour. When printing images that contain data such as
photographs, it is best to print full colour plus foil colour using
Overlay mode
In simultaneous full colour plus foil colour printing, indicate the gold and
silver foil colours by selecting the corresponding colour component. For
characters of 32 points or more, select the following approximate colours.
•
Colour compositions using RGB settings (n/255)
•
Colour compositions using RGB settings (n/100%)
Foil Colour Application colour used to indicate the foil colour
Gold Foil Yellow (or yellow/orange)
Silver Foil Grey
Foil Colour R G B
Gold Foil 225 160 0
Silver Foil 189 193 197
Foil Colour R G B
Gold Foil 88 63 0
Silver Foil 74 76 77