Operation Manual

English
6-6 Chapter 6
Exchanging Dye Sub Cleaning Pads
(for Dye Sub Colour Printing)
In order to maintain good print quality, replace the orange-coloured
cleaning pad after printing 20 sheets of paper. A cleaning pad is enclosed
in each new package of Dye Sub paper.
1
To remove the cleaning pad;
Open the front cover, and pull on the left end of the cleaning pad while
holding the right side of the pad, as shown in the figure.
Caution:
The white pad (next to the cleaning pad) is not removable.
2
To fit a new cleaning pad;
Mount the pad on the platen by locating the two lugs on the underside
of the pad into the holes on the platen. Push the pad onto the platen to
make sure it sits flat.
Caution:
Always fit a cleaning pad in the printer. Failure to do so can cause
the printer to malfunction.