Operation Manual

English
Troubleshooting 7-1
Chapter 7
Troubleshooting
Troubleshooting - General
Power failure while Printing
With the front cover closed, turn the printer on. The printer will initialise
and eject the partially printed page.
When the front cover has been opened before the printer is turned back on,
perform the following.
1
If an ink cartridge (1) is on the carriage (2), press on the middle of the
cartridge, as shown below, to ensure it is properly seated. Also, check
that the cartridges in the holders are correctly installed. See ‘Installing
Ink Cartridges’ in Chapter 2 - Initial Setup.
2
Close the front cover.
The printer will now be able to resume operation.
A
1
2