Operation Manual

English
7-10 Chapter 7
5 Is there a paper jam?
Clear the paper jam. Sometimes a small piece of the jammed page will
tear off and remain in the printer so that sheets will continue to jam after
the page is removed. Remove any small remaining pieces of paper.
6 Is the paper feed guide too narrow for the paper?
The paper feed guide should hold the paper loosely enough so that it can
feed easily.
7 Is there too much paper in the sheet feeder?
The sheet feeder can hold up to 100 sheets of plain paper, any more than
this may cause a paper jam.
8 Is the paper feed switch positioned correctly for the paper feed
method?
To print on plain paper using automatic feed mode, set the paper feed
switch to position “A”; to print in manual feed mode, set it to position
“M”.
9 Is the cut corner in the correct position (for transparencies and
back print film)?
When these sheets are inserted with the cut corner incorrectly
positioned, they may not feed correctly. Follow the instructions and
insert the sheets correctly.
10 Are you printing on envelopes, thermal paper, or picture cards?
Correct printing and feeding of envelopes and thermal paper cannot be
guaranteed. The paper side of picture cards can be used if the card is
less than 0.23 mm (0.01") thick and manual feed mode is used. Printing
on the photo side is unreliable.
11 Are you using home-made cards or thick cards?
Cards with thickness within the range of 0.07 mm - 0.23 mm (0.003" -
0.01") can only be used in manual feed mode.
12 Is there anything blocking the paper output slot (such as a large
pile of printed sheets)?
This can cause ejection or feed problems, remove the blocking paper.