Operation Manual

Appendix A - menu system > 120
Print Setup
(cont.)
Color Menu
(cont.)
Adjust Registration Execute Performs automatic
colour registration
adjustment. Normally
this is done on power
on and when the top
cover is opened and
then closed. This
process accurately
aligns the cyan,
magenta and yellow
images to the black
image.
Cyan Reg Fine Adj -3 ~ 0 ~ +3 Performs fine
adjustment of image
timing in relation to
the black image
component.
Magenta Reg Fine Adj -3 ~ 0 ~ +3
Yellow Reg Fine Adj -3 ~ 0 ~ +3
Ink Simulation OFF, SWOP,
EUROSCALE, JAPAN
Selects from a range
of industry standard
colour swatches.
UCR Low, Medium, High Selects the limitation
of the toner layer
thickness.
If paper curl occurs in
dark printing, selecting
Medium or Low
sometimes helps
reduce curl.
CMY100% Density Enable, Disable When enabled, black
areas are produced
using 100% C, M, and
Y instead of black. This
results in a glossier
finish.
CMYK Conversion ON, OFF Setting to OFF will
simplify the conversion
process of CMYK data,
which will reduce
process time.
This setting is ignored
when Ink Simulation
function is used.
System
Configuration
Menu
Personality Auto Emulation,
PCL, IBM PPR,
EPSON FX,
PS3 Emulation
This item selects which
industry standard
emulation your MFP
should use. When set
to Auto, incoming data
is examined and the
correct emulation is
automatically selected
each time a print job is
received.
Alarm Release Manual, Auto
When Manual, non-
critical warnings, such
as requests for a
different paper size, can
be cleared by pressing
the RESET button.
When set to Auto, they
are cleared when the
print job resumes.
ITEM OPTION VALUE/DESCRIPTION