Operation Manual
- 158 -
9. Troubleshooting
The output port of the printer driver is
incorrect.
Select the output port for connecting
the LAN cable or USB cable.
-
The machine is processing data from
another interface.
Wait until printing is complete. -
[Received invalid data] is displayed
on the operator panel and the
machine does not print.
Press the (SETTING) button
on the operator panel, select [Admin
Setup] > [Print Setup] > [Print menu]
> [Printer Adjust] > [Timeout Injob],
and then select a longer time. The
factory default setting is 40 seconds.
-
Cause Solution Reference