Operation Manual

- 36 -
Connecting to a Computer
1
1. Setup
7 Press the to select [IP Address Set],
and press the <ENTER> button.
8 If setting the IP address manually, press
the scroll button and select [Manual],
and press the <ENTER> button.
Proceed to the step 9.
If obtaining the IP address automatically, check
that [Auto] is selected, and press the <ENTER>
button.
Proceed to the step 15.
9 Press the <BACK> button until
[Network Setup] is displayed.
Press the scroll button to select
[IPv4 Address], and press the
<ENTER> button.
10 Enter the IP address using the numeric
(0-9) keys, and press the <ENTER>
button.
To move to the next box, press the <ENTER>
button.
11 Press the <BACK> button until
[Network Setup] is displayed.
Press the scroll button
to select
[Subnet Mask], and press the
<ENTER> button.
12 Enter the subnet mask in the same
manner of IP address.
To move to the next box, press the <ENTER>
button.
13 Press the <BACK> button until
[Network Setup] is displayed.
Press the scroll button to select
[Gateway Address], and press the
<ENTER> button.