Quick Start Guide

2
Basic Copying Operation
27
Density adjustment
To lighten the density, press , to darken it, press
.
You can manually adjust the density by
pressing either
or .
By default, density adjustment is set to [AUTO] when
the color mode is “BLACK”.
Press [AUTO] to adjust the density
automatically.
Copying from MPT
1
Move the paper holding lever
toward the outside and then
2
place
paper face down on the MPT.
1111
Press [PAPER TYPE] if the type of the paper you
placed on the MPT is other than plain paper.
1
Press the button corresponding to
the size of paper set on the MPT and
then
2
[OK].
33
Press the [START] button. Copying from
MPT starts.
44
2
1
2
1
Align the side guides to the paper
length and then move the paper
holding lever toward the equipment.
22