Quick Start Guide

6
Specications of Equipment
75
Recommended paper for each media type
Media Type Oki recommendations/Manufacturer Weight
PLAIN
A/B format: ColorCopy/mondi
LT format: Laser Print/Hammermill, Color Copy Paper/Hammermill
90 g/m
2
, 24 lb. Bond
100 g/m
2
, 28 lb. Bond
THICK1
A/B format: ColorCopy/mondi
LT format: Laser Print/Hammermill, Color Copy Paper/Hammermill
120 g/m
2
, 32 lb. Bond
160 g/m
2
, 60 lb. Cover
THICK2
A/B format: ColorCopy/mondi 200 g/m
2
A/B format: 3478/ZWECK-AVERY
LT format: 5165/AVERY
—
THICK3
A/B format: ColorCopy/mondi
LT format: Color Copy Cover/Hammermill
220 g/m
2
, 80 lb. Cover
250 g/m
2
THICK4
A/B format: ColorCopy/mondi
LT format: Color Copy Cover/Hammermill
280 g/m
2
, 100 lb. Cover
SPECIAL1
A/B format: Water Proof Paper Duplex
*3, *4, *5
LT format: Weather Resistance Paper
*3, *4, *5
230 g/m
2
SPECIAL2 AquaAce
*5
230 g/m
2
TRANSPARENCY
*1
A/B format: BG72/FOLEX
LT format: CG3700/3M
—
ENVELOPE
*2
COM10/Westvaco Columbian CO138/Westvaco
Monarch/Mailwell No.553/Mailwell
—
*1 Only Oki-recommended OHP lm should be used. Using any other lm may cause a malfunction.
*2 Printing on the back side of an envelope is possible only when the envelope is not a self-sealing envelope.
*3 This type of paper is available for automatic duplex copying (A4/LT or smaller sizes are recommended).
*4 Place the sheets one by one on the MPT.
*5 When copy paper is exiting, remove it every time about 10 sheets have accumulated on the receiving tray or the tray of the Finisher.
Paper only acceptable for printing functions
Feeder Media type Weight Maximum sheet capacity Paper size
MPT
PLAIN
90 - 105 g/m
2
24 - 28 lb. Bond
1 sheet
*1, *2
305 mm x 1200 mm
(12.00" x 47.24")
THICK1
106 - 163 g/m
2
- 90 lb. Index
*1 Place the sheets one by one on the MPT.
*2 When the Finisher is installed, the receiving tray of the equipment is not available for paper exiting. The upper receiving tray of the installed Finisher, the
upper receiving tray of the installed Saddle Stitch Finisher or upper receiving tray of the installed Inner Finisher is available for paper exiting.