LED Printer User Manual
Table Of Contents
- Contents
- Features
- Consumables
- Options
- Operating Your Printer
- Using the Front Operator Panel
- OKIPAGE 10e Front Operator Panel Reference
- OKIPAGE 10e Function Reference
- Changing the Menu Settings
- Using the Printer Menu Setup
- Resetting the Menu
- Using Power Save to Minimize Warm-up Time
- Printing the Menu
- Maintenance Menu
- Using Special Print Media
- Printing a Special Document
- Enhancing Print Quality
- Printing Envelopes
- Selecting Envelopes
- Printing Transparencies and Adhesive Labels
- Guidelines for Transparencies and Labels
- Using Recycled Print Media
- Printer Maintenance
- Replacing The Toner Cartridge
- Replacing the Image Drum Cartridge
- Cleaning the LED Array
- Printing a Cleaning Page
- Problem Solving
- Clearing Paper Jams
- Print Quality Problems
- Software Problems
- Hardware Problems
- Service and Support
- OKIDATA ONLINE
- Your Dealer
- The Okidata Customer Support Center
- Okidata Customer Service Representatives
- Purchasing Supplies
- Warranty Service
- OKIDATA SERVICE CENTERS
- Index
- Index
E-19
5 Adjust the paper guides to the width of the media.
6 Insert the envelope − flap down and to the left −
until the printer grips it.
7 Issue the print command in your software.
Selecting Envelopes
• No windows, metal clasps, or snaps – they can
damage the image drum.
• Paper no heavier than 28 lb.
• Sturdy construction.
• Smooth, even surface.
• Seams down the sides, not across the middle.
• Squared-off flaps that don’t cover the print area.
• No self-sealing flaps.
• Always use rear output when printing envelopes.
Printing Transparencies and Adhesive
Labels
1 Pull out the rear exit extender until it locks