LED Printer User Manual

E-20
2 Lift out the support bar.
3 Insert the label sheet with print-side up.
Guidelines for Transparencies and Labels
• Always use manual feed.
• Always use rear output when printing transparencies
and adhesive labels.
• Should be specifically made for laser printers or
photocopiers.
• Must be able to withstand heat of 200°C for 0.1
second.
• Labels should cover the entire carrier sheet-carrier
and adhesive must not be exposed to any part of
the printer.
• Use rear paper output − to reduce heat exposure
and curling.
Using Recycled Print Media
Recycled paper should be restricted to 20% to 35%
Post Consumer Content and not exceed 50%. Paper
must be relatively stiff and have minimum edge curl.
Paper should be white and bright for maximum
contrast. The surface should be smooth, clean, and
stable electrically and dimensionally.