Operation Manual

1
2
3
4
5
6
HOW TO MAKE COPIES
- 28 -
● HOW TO MAKE COPIES
Before Making Copies
Forgery prevention function
This equipment has a forgery prevention function. Therefore,
scan or copy function might not operate correctly.
Placing Originals
Acceptable originals
When the RADF (Reversing Automatic Document Feeder) is
used, 2-sided originals can be automatically scanned one
sheet after another. When the document glass is used,
originals such as OHP films, tracing paper, booklet or
3-dimensional objects, that cannot be placed on the RADF can
be scanned, as well as plain paper.
Note
• Automatic size detection does not work properly when A/B
format originals are used in equipment for North America. It
does not work properly when LT format originals are used in
equipment other than that for North America.
• In some models, automatic size detection does not work
properly when K format paper is used for printing. (K format
is a standard paper size in China.)
• Do not place any heavy objects (8 Kg(18lb.) or over) on the
document glass and do not press on it with force.
• When using the RADF, be sure to place A5-size originals in
a landscape direction, aligning the guides.
• A maximum of 1000 sheets can be scanned per 1 copy job
or up until the embedded memory becomes full.
Placing originals on the document glass
The document glass can be used for originals such as OHP
films or tracing paper, as well as plain paper, that cannot be
placed on the RADF.
Do not place any heavy objects (8 Kg(18lb.) or over) on the
document glass and do not press on it with force.
Breaking the glass could injure you.
1
Raise the RADF.
2
Place the original with its face down on the
document glass and align it with the left
rear corner of the glass.
When you copy highly transparent originals
When you copy highly transparent originals such as OHP
films or tracing paper, place a blank sheet, which is the
same size as the original or larger, over the original.
3
Lower the RADF carefully.
Location
Maximum
size
Paper
weight
Original size
Accetable
sizes for
automatic size
detection
Document
glass
Length:
216mm
(8.5")
Width:
355.6mm
(14")
-
A/B format:
A4, A5, A6, B5,
Folio, 16K
LT format:
Letter, Legal,
Legal 13, Legal
13.5, EX, ST,
8.5SQ-R
Document
size cannot
be detected
automatically.
RADF Legal 14
(8.5 x 14")
60 - 105 g/m
2
(16 - 28lb.)
1-sided
originals:
A/B format:
A4, A5, A6, B5,
Folio, 16K
LT format:
Letter, Legal,
Legal 13, Legal
13.5, EX, ST,
8.5SQ-R
2-sided
originals:
A/B format:
A4, A5, B5,
Folio,
16K
LT format:
Letter, Legal,
Legal 13, Legal
13.5, EX, ST,
8.5SQ-R
Other than
North America:
mixed-size
setting is
disabled:
A4, A5, B5,
Folio
mixed-size
setting is
enabled:
A4, Folio
North America:
Letter, Legal,
Legal13